Table of Contents
Advertisement
Available languages
Available languages
EN
TECHNICAL CHARACTERISTICS
For the technical specifications, refer to the nameplate (located on the right side of the water heater).
MODEL
Power (kW)
Voltage (V)
Phases
Installation
Construction
Frequency (Hz)
Electric current (A)
Water Protection
Pipe Connection
Min water pressure (kPa)
Max water pressure (kPa)
Weight (kg)
Dimensions (mm)
INSTALLATION
Caution before installation
1. This heater must be permanently connected to the direct main current supply. The use of a plug
and socket is not recommended.
3. For the correct size of wire conductor corresponding to different electrical loading, please refer
to table1.
4. This heater operates at a minimum and maximum water pressure as per table of Technical Char-
acteristics
5. This heater will not function if there is insufficient water flow to trigger the flow switch.
6. The built-in ELCB will automatically cut off the power supply in case there is a current leakage
above 15mA.
7. The thermostat will automatically cut off the power supply if it has sensed an abnormal rise in
showering water temperature. Only qualified technicians are allowed to reset the thermal cut-
out built inside the appliance.
8. To avoid accidentally scalding, user is advised to operate the heater at least a min inlet water flow
of 2 l/min.
PRODUCT INFORMATION
AURES
PREMIUM 4.5
PREMIUM 4.5P
10
500
1,8
4
AURES
AURES
PREMIUM+ 4.5
4,5
220
Mono
Single point
Open outlet
50
20,5
IPX25
1/2" BSP
5
10
380
500
1,9
1,9
416 x 200 x 91
AURES
PREMIUM+ 4.5P
5
380
2,0
Advertisement
Table of Contents
