Recording An Audio Track 录制音频轨道 - PRESONUS Quantum 4848 Owner's Manual

6
Studio One Profesional Quick Start
6.3 Creating a New Song
6.3.3 Recording an AudioTrack
Track anatomy 音轨剖析:
Note:MIDI tracks are nearly identical to Audio tracks. The Input Source list for MIDI
tracks lists available external MIDI devices as well as any virtual instruments that
have been added to the Song.
注意： MIDI 轨道与音频轨道几乎相同。 MIDI 轨道的输入源列表列出了可用的外
部 MIDI 设备，以及任何已经添加到歌曲中的虚拟乐器。
1. To begin recording, create an audio track from the Add Tracks window,
set its input to Input 1 on your Quantum 4848 interface, and connect a
source to the same input.
要开始录音，从" Add Tracks"窗口创建一个音轨，将其输入设置为
Quantum 4848接口的输入1，并将一个音源连接到同一输入。
2. Select Record Enable on the track. Turn up the Input 1 level on your
audio interface while speaking/singing into the microphone. You should
see the input meter in Studio One react to the input. Adjust the gain so
the input level is near its maximum without clipping (distorting).
在音轨上选择 "Select Record Enable"。对着麦克风说话/唱歌时，调
高音频接口上的 Input1电平。你应该看到 Studio One 中的输入仪表
对输入的反应。调整增益，使输入电平接近其最大值而不出现削波
（失真）。
You are now ready to start recording. For complete instructions, please consult
the Studio One Reference manual located in Help | Studio One Reference
Manual.
Quantum 4848
Owner'sManual
41