Delta AC MAX Installation And Operation Manual page 9

Part
Cable holder
RFID
Recommended tools
The following tools are recommended for the installation of product:
Part
Electro drill
Pencil
Spirit level
Terminal crimper
Torque wrench
Torque screwdriver (cross)
Torque screwdriver (slotted)
Torx T20 screwdriver
Torx T30 screwdriver
Installer-supplied components
Installers may prepare the following parts:
1. Conduit and hub of appropriate size (1〞or refer to the local rules) for input power wires to ensure the water
resistance.
2. DIN 46228-4 Cord end terminal:
Please use the cord end terminal for split conductors while installation.
Current 48 A
Pin length 18 mm
Wire range 4 AWG
Description
1x
2x
Description
Used for masonry walls
Crimping input wire
Securing mounting bracket to masonry walls or stand
Securing mounting bracket to masonry walls or stand
Securing front cover and middle cover
Securing mounting bracket
80 A
18 mm
2 AWG
9
Part
wood screws
v1.0.1
Description
2x