Delta AC MAX Installation And Operation Manual page 18

(Optional) connect RJ45 port for Ethernet function
Secure middle cover and front cover
1. Remove the water proof cap and pass through the
Ethernet cable with appropriate conduit or cable gland.
2. Connect the Ethernet cable into the RJ45 port.
1. Recover the middle cover on the EVSE and secure the
middle cover by using Torx T20 screwdriver.
Torque: 1.2 N·m (10.5 lb·in)
Note: rubber sealing shall be put on the appropriate
position before recovery.
18
v1.0.1