Replace The Flash Memory Card Or Flash Disk - Cisco CISCO7206 Quick Start Manual

1
Insert the Flash memory card or Flash Disk
1
Insertion complete—Flash memory card or
2
Flash Disk protrudes

Replace the Flash Memory Card or Flash Disk

Flash memory cards and Flash Disks are replaceable while the system is operating.
Note
12. Remove the Flash memory card or Flash Disk by pushing the ejector button (3).
13. Insert the new Flash memory card or Flash Disk (1 and 2). The Flash memory card or Flash Disk protrudes from the I/O
controller when it is completely inserted.
Also see Using the Flash Disk at http://www.cisco.com/univercd/cc/td/doc/product/core/cis7000/frus/5819fdsk.htm.
Also see Memory Replacement Instructions for the Network Processing Engine or Network Services Engine and I/O
Controller at http://www.cisco.com/univercd/cc/td/doc/product/core/7206/fru/memory/index.htm.
26
2 3
Press the ejector button
3