Changing The Flash Setting - AGFA ePhoto ePHOTO 1280 User Manual

Changing Basic Settings (cont.)
Press in the EasyPilot button again. A column of settings appears below the Resolution
icon.
Turn the EasyPilot button in either direction to highlight the resolution settings in order.
When the desired resolution is highlighted, press in the EasyPilot button. The new reso-
lution is now selected.
! Note: You can leave the menu system at any time without making any changes by simply
pressing the Info button.

Changing the Flash Setting

The ePhoto 1280 provides the following flash settings:
Note: The flash setting remains in effect until you change it, even if you turn the camera off.
!
23
— flash used as needed
— flash always used
— controlled pre-flashing to reduce the "red-eye" effect
— no flash used