The Recorded Image Is Too Bright - AGFA ePhoto ePHOTO 1280 User Manual

Troubleshooting (cont.)
You may have selected an incorrect advanced setting. If one of the following symbols
appears, go to the respective menu:
Use PhotoWise to adjust the brightness and contrast of your image (see the .pdf file
PhotoWise Tips or on-line help in PhotoWise itself).

The recorded image is too bright.

If the flash is in the Fill-in mode, there may be too much light. Change the
to AUTO.
The camera may be pointed directly at a bright light. Take the picture from a different
angle.
Use PhotoWise to adjust the brightness and contrast of your image (see the .pdf file
PhotoWise Tips or on-line help in PhotoWise itself).
You may have selected an incorrect advanced setting. If one of the following symbols
appears, go to the respective menu:
You may have been too close to the subject (i.e., Macro) to use the flash. Turn off the flash
and take the picture again.
55
White Balance. Adjust the setting or set it to automatic.
White Balance. Adjust the setting or set it to automatic.
Manual, Aperture Value,
Manual, Aperture Value,
Time Value,
flash setting
Time Value,