Table of Contents
Advertisement
Installing the Cable Cover
You must mount the radar, route all cables, and connect them to the radar before you can install the cable
cover.
1 Hold the cable cover
parallel to the side of the pedestal
.
2 Slide the cable cover onto the pedestal
, and slide the tab
into the slot on the pedestal.
3 Secure the cable cover to the pedestal using the attached screws.
Radar Operation
All functions of this radar are controlled with your Garmin chartplotter. See the Radar section of your
chartplotter's owner's manual for operating instructions. To download the latest manual, go to
garmin.com
/manuals.
If you have more than one radar on your boat, you must be viewing the radar screen for the radar you want to
configure.
Software Update
You must update the Garmin chartplotter software when you install this device.
If your chartplotter has Wi‑Fi
®
technology, you should update the software using the ActiveCaptain
®
app on a
compatible Android
or Apple
device.
™
®
If your chartplotter does not have Wi‑Fi technology, you should update the software using a memory card and a
Windows
®
or Mac
®
computer.
For more information, go to support.garmin.com.
12
Advertisement
Table of Contents
