Advertisement
Quick Links
To obtain the best possible performance, install your GMI 10 Marine Instrument according to the following instructions.
If you experience difficulty during the installation, contact Garmin Product Support, or seek the advice of a professional
installer.
The GMI 10 will communicate with NMEA 2000- or NMEA 0183-compatible sensors and devices, and can show
information such as speed, heading, water depth, and fuel information when connected to the appropriate sensors.
Product Registration
Help us better support you by completing our online registration today. Go to http://my.garmin.com. Keep the original
sales receipt, or a photocopy, in a safe place.
For future reference, write down the serial number assigned to your GMI 10 in the space provided below. The serial
number is located on a sticker on the back of the GMI 10.
Serial number
Contact Garmin
Contact Garmin Product Support if you have any questions while installing or using your GMI 10. In the USA, go to
www.garmin.com/support, or contact Garmin USA by phone at (913) 397.8200 or (800) 800.1020.
In the UK, contact Garmin (Europe) Ltd. by phone at 0808 2380000.
In Europe, go to
www.garmin.com/support
Garmin (Europe) Ltd. by phone at +44 (0) 870.8501241.
Packing List and Accessories
Before installing your GMI 10, confirm that your package includes the following items. If any parts are missing, contact
your Garmin dealer immediately.
Standard Package
•
GMI 10 unit
•
Protective cover
•
Flush mount hardware
•
NMEA 0183 data wiring harness
•
2 NMEA 2000 T-connectors
•
2 NMEA 2000 terminators (1 male, 1 female)
•
1 NMEA 2000 drop cable (2 m)
•
1 NMEA 2000 power cable (2 m), (3 A fuse)
•
Installation instructions
To install and use your GMI 10
1. Select a location (page 2).
2. Flush mount the GMI 10 (page 2.
3. Connect the GMI 10 to the sensors and to power (page 3).
January 2010
GMI 10 Installation Instructions
and click
Contact Support
190-01168-02 Rev. A
for in-country support information, or contact
Optional Accessories
•
Additional NMEA 2000 network components
Tools Needed
•
Jigsaw or 3
/
in. (90 mm) hole saw,
17
32
•
Drill and drill bits
•
Center punch and hammer
•
Scissors
•
File and sandpaper
•
Phillips screwdriver
•
Anti-seize lubricant (optional)
Printed in Taiwan
Advertisement
Related Manuals for Garmin 190-01168-02
Summary of Contents for Garmin 190-01168-02
- Page 1 Serial number Contact Garmin Contact Garmin Product Support if you have any questions while installing or using your GMI 10. In the USA, go to www.garmin.com/support, or contact Garmin USA by phone at (913) 397.8200 or (800) 800.1020. In the UK, contact Garmin (Europe) Ltd. by phone at 0808 2380000.
- Page 2 Step 1: Select a Location for the GMI 10 Consider the following when you select an installation location: • Provides optimal viewing as you operate your vessel. • Allows easy access to the keypad on the GMI 10. • Is strong enough to support the weight of the GMI 10 and protect it from excessive vibration or shock. •...
- Page 3 NMEA 2000 network. For more information on NMEA 2000, visit www.garmin.com. Follow the directions and reference the diagrams on to either connect the GMI 10 to your existing NMEA 2000 network or to build a basic NMEA 2000 network.
- Page 4 Ignition or in-line switch 1 Vdc battery T-connectors Female terminator Notes: • To add additional sensors to your NMEA 2000 network, follow the instructions included with the sensor. • To learn more about NMEA 2000 and building a NMEA 2000 network, visit www.garmin.com. • The GMI 10 is powered by the NMEA 2000 network. NMEA 000 device (not included) Drop cable (included) T-connector (included) Existing NMEA 000 network Connecting the GMI 10 to an Existing NMEA 2000 Network Fuse Drop cable Power cable Creating a Basic NMEA 2000 Network GMI 10...
- Page 5 Solder all connections and seal them with heat-shrink tubing. GMI 10 Device GMI 10 Device Wiring the GMI 10 to a GPS 17x NMEA 0183 HVS Antenna GMI 10 Device Wiring the GMI 10 to a Standard NMEA 0183 Device Notes: • Consult the instructions for your NMEA 0183-compliant device to identify the Tx/A(+) and Tx/ B(-) wires. • When connecting NMEA 0183 devices with two transmitting and two receiving lines, it is not necessary for the NMEA 2000 bus and the NMEA 0183 device to connect to a common ground. • The yellow (accessory on) wire and the black (accessory ground) wire are used only when wiring the GMI 10 to a Garmin GPS 17/17x antenna. GMI 10 Installation Instructions Color Black Yellow Blue > White > Brown > Green > GMI 10 Data Cable Battery WIRE 12 Vdc...
-
Page 6: Nmea 2000 Pgn Information
If your NMEA 0183-compatible device has only one transmitting wire (Tx), connect it to the brown wire (Rx/A) from the GMI 10, and connect the green wire (Rx/B) from the GMI 10 to NMEA ground. NMEA 000 network GMI 10 Device Wiring the GMI 10 to a NMEA 0183 Device with One Transmitting Wire NOTE: When connecting a NMEA 0183 device with only one transmitting (Tx) line or with only one receiving (Rx) line, the NMEA 2000 bus and the NMEA 0183 device must be connected to a common ground. -
Page 7: Specifications
LICENSE AGREEMENT. PLEASE READ THIS AGREEMENT CAREFULLY. Garmin Ltd. and its subsidiaries (“Garmin”) grant you a limited license to use the software embedded in this device (the “Software”) in binary executable form in the normal operation of the product. Title, ownership rights, and intellectual property rights in and to the Software remain in Garmin and/or its third-party providers. - Page 8 For the latest free software updates (excluding map data) throughout the life of your Garmin products, visit the Garmin Web site at www.garmin.com. © 2010 Garmin Ltd. or its subsidiaries Garmin International, Inc. 1200 East 151 Street, Olathe, Kansas 66062, USA Garmin (Europe) Ltd. Liberty House, Hounsdown Business Park, Southampton, Hampshire, SO40 9LR UK Garmin Corporation No. 68, Jangshu 2 Road, Sijhih, Taipei County, Taiwan www.garmin.com January 2010 Part Number 190-01168-02 Rev. A Printed in Taiwan...