Garmin GMI 10 Digital Marine Instrument Display Installation Instructions Manual
Marine instrument
Hide thumbs
Also See for GMI 10 Digital Marine Instrument Display:
- Product information (48 pages) ,
- Quick start manual (20 pages) ,
- Template (1 page)
Advertisement
Quick Links
To obtain the best possible performance, install your GMI 10 Marine Instrument according to the following instructions.
If you experience difficulty during the installation, contact Garmin Product Support, or seek the advice of a professional
installer.
The GMI 10 will communicate with NMEA 2000- or NMEA 0183-compatible sensors and devices, and can show
information such as speed, heading, water depth, and fuel information when connected to the appropriate sensors.
WARNING: See the Important Safety and Product Information guide in the product box for product warnings and
other important information.
Product Registration
Help us better support you by completing our online registration at www.garmin.com/registration/.
For future reference, write down the serial number assigned to your GMI 10 in the space provided below. The serial
number is located on a sticker on the back of the GMI 10.
Serial number
Contact Garmin
Contact Garmin if you have any questions while installing or using your GMI 10. In the USA contact Garmin Product
Support by phone: (913) 397-8200 or (800) 800-1020; or go to www.garmin.com/support/.
In Europe, contact Garmin (Europe) Ltd. at +44 (0) 870.8501241 (outside the UK) or 0808 2380000 (within the UK).
Packing List and Accessories
Before installing your GMI 10, confirm that your package includes the following items. If any parts are missing, contact
your Garmin dealer immediately.
Standard Package
•
GMI 10 unit
•
Protective cover
•
Flush mount hardware
•
Power/data wiring harness
•
2 NMEA 2000 T-connectors
•
2 NMEA 2000 terminators (1 male, 1 female)
•
1 NMEA 2000 drop cable (2 m)
•
1 NMEA 2000 power cable (2m), (3 A fuse)
•
Installation instructions
To install and use your GMI 10
1. Select a location.
2. Flush mount the GMI 10.
3. Connect the GMI 10 to power.
4. Connect the GMI 10 to sensors.
January, 2008
GMI 10 Installation Instructions
190-00892-02 Rev. B
Optional Accessories
•
Additional NMEA 2000 network components
Tools Needed
•
Jigsaw or 3
/
in. (90mm) hole saw,
17
32
•
Drill and drill bits
•
Center punch and hammer
•
Scissors
•
File and sandpaper
•
Phillips head screwdriver
•
Anti-seize lubricant (optional)
Printed in Taiwan
Advertisement
Related Manuals for Garmin GMI 10 Digital Marine Instrument Display
Summary of Contents for Garmin GMI 10 Digital Marine Instrument Display
- Page 1 Serial number Contact Garmin Contact Garmin if you have any questions while installing or using your GMI 10. In the USA contact Garmin Product Support by phone: (913) 397-8200 or (800) 800-1020; or go to www.garmin.com/support/. In Europe, contact Garmin (Europe) Ltd. at +44 (0) 870.8501241 (outside the UK) or 0808 2380000 (within the UK).
- Page 2 nstallatIon nstructIons Step 1: Select a Location for the GMI 10 Consider the following when you select an installation location: • Provides optimal viewing as you operate your vessel. • Allows easy access to the keypad on the GMI 10. •...
- Page 3 8. Place the GMI 10 into the cutout 9. Securely tighten the four mounting screws through the GMI 10 into the drilled mounting holes. NOTE: Stainless-steel screws may bind when screwed into fiberglass and overtightened. Garmin recommends applying an anti-galling, stainless anti-seize lubricant to the screw before using. 10. I nstall the mounting covers by snapping them into place. Step 3: Connect the GMI 10 to Power...
- Page 4 GMI 10 to your existing NMEA 2000 network, or build a basic NMEA 2000 network. For more information on NMEA 2000, visit www.garmin.com. Follow the directions and reference the diagrams on page 5 to either connect the GMI 10 to your existing NMEA 2000 network, or to build a basic NMEA 2000 network.
- Page 5 NMEA 000 device (not included) 1 Vdc battery Additional Drop cable drop cable and Power cable T-connector (not included) T-connectors Male Female terminator terminator Creating a Basic NMEA 2000 Network Notes: • To add additional sensors to your NMEA 2000 network, follow the instructions included with the sensor. • To learn more about NMEA 2000 and building a NMEA 2000 network, visit www.garmin.com. • The GMI 10 is not powered by the NMEA 2000 network, it must be separately connected to the power source. GMI 10 Installation Instructions...
- Page 6 POWER GND Compliant Device NMEA GND BROWN Tx/A (+) > > GREEN Tx/B (-) > > Wiring the GMI 10 to a Standard NMEA 0183 Device Notes: • Consult the installation instructions for your NMEA 0183-compliant device to identify the Transfer (TX) A(+) and B(-) wires. • If your NMEA 0183-compliant device has only one transmitting wire (Tx), connect it to the brown wire (Rx/A) from the GMI 10, and connect the green wire (Rx/B) to ground. • The blue (Tx/A) and white (Tx/B) wires are used only when wiring the GMI 10 to a Garmin GPS 17/17x antenna. • The yellow (accessory on) wire is used only when wiring the GMI 10 to a Garmin GPS 17/17x antenna. GMI 10 Installation Instructions...
-
Page 7: Nmea 2000 Pgn Information
nstallatIon nstructIons NMEA 2000 PGN Information Use this table to determine the approved NMEA 2000 PGN information that can be received and transmitted by a GMI 10 when communicating with a NMEA 2000-compliant device. Receive Transmit 059392 ISO Acknowledgment 059392 ISO Acknowledgment 059904 ISO Request 059904... -
Page 8: Specifications
LICENSE AGREEMENT. PLEASE READ THIS AGREEMENT CAREFULLY. Garmin grants you a limited license to use the software embedded in this device (the “Software”) in binary executable form in the normal operation of the product. Title, ownership rights, and intellectual property rights in and to the Software remain in Garmin.