Table of Contents
Advertisement
Whammy Effect Selector Knob
4.
This knob is used to select the Whammy (bend), Harmony intervals, or Detune range controlled
by the expression pedal.
Expression Pedal
5.
This pedal is used to control the pitch bending amount of the selected Harmony, Whammy, or
Detune e ect. Rocking it forward (toe down) increases the amount of pitch bending while rocking
it back (toe up) decreases the amount of pitch bending.
Drop Tune Effect Selector
6.
This knob selects the shift interval for the Drop Tune e ect.
Drop Tune LEDs
7.
One of these LEDs will light when a Drop Tune e ect is selected.
Drop Tune Effect Status LED
8.
This LED lights to indicate the Drop Tune e ect is on. When the Drop Tune e ect is bypassed,
this LED will be o .
Drop Tune Effect Switch
9.
This switch turns the Drop Tune e ect on and o .
Momentary Switch
10.
This switch momentarily turns the Drop Tune e ect on or o to create hammer-on and pull-o
style shifting e ects.
Instrument Input
11.
Connect your instrument to this jack.
MIDI Input
12.
Connect any external MIDI device to this jack for the purpose of controlling the Whammy
remotely.
Footswitch Input
13.
An optional FS3X Footswitch can be plugged in here for hands free e ect selection (see page 18
for more information).
Advertisement
Table of Contents
