Table of Contents
Advertisement
TG6611_6612HK(e-e).book Page 12 Tuesday, May 24, 2011 3:18 PM
Getting Started
Turning the power on/off
Power on
Press {ic} for about 1 second.
Power off
Press {ic} for about 2 seconds.
Initial settings
■ Direct command code:
Programmable settings can be accessed
by pressing 8, y and then the
corresponding code on the dial keypad
(page 20).
Example: Press 8y1z1.
■ Symbol meaning:
Example: {r}: "Off"
Press {V} or {^} to select the words in
quotations.
Important:
L When you install the batteries for the first
time, the handset may prompt you to set
display language and date and time.
1 Perform step 2 in "Display language",
page 12, and then press M.
2 Continue from step 2 in "Date and time",
page 12.
Display language
The display language is preset to Chinese.
Sample displays shown in these operating
instructions are shown in English.
1
8y11z
2
{r}: Select your desired language. s
M
3
{ic}
Date and time
1
8y1z1
12
2
Enter the current date, month, and year.
s M
Example: 15 July, 2011
15 z7 11
3
Enter the current hour and minute.
Example: 9:30
z9 3z
L You can select 24-hour or 12-hour
clock format ("AM" or "PM") by
pressing /.
4
M s {ic}
Note:
L The date and time may be incorrect after a
power failure. In this case, set the date and
time again.
Dialling mode
If you cannot make calls, change this setting
according to your telephone line service. The
default setting is "Tone".
"Tone": For tone dial service.
"Pulse": For rotary/pulse dial service.
1
8y12z
2
{r}: Select the desired setting.
3
M s {ic}
One touch eco mode
The {ECO/R} button on the handset enables
you to activate the eco function with one touch.
By activating eco mode, your unit can reduce
the base unit transmission power by up to 90%
in standby mode.
You can turn on/off one touch eco mode by just
pressing {ECO/R}. The default setting is
"Normal".
– When the one touch eco mode is on: "Low"
is temporarily displayed and i is shown
on the handset display instead of w.
– When the one touch eco mode is off:
"Normal" is temporarily displayed and
i goes off from the handset display.
Note:
L When there is another cordless phone
nearby and it is in use, the base unit
transmission power may not be reduced.
Advertisement
Table of Contents
