Table of Contents
Advertisement
Safety distances to the sides
and back of the appliance
The SmartLine appliance should
preferably be installed with plenty of
space on the right and left.
The minimum distance specified
below must be observed between the
rear of the SmartLine applianace and a
tall unit or room wall.
The minimum distance , specified
below must be adhered to between one
side of the SmartLine appliance (right or
left) and a tall unit or room wall. A
minimum distance of 300 mm must be
observed on the opposite side.
Minimum horizontal distance from
the back edge of the appliance to a
combustible surface:
50 mm
Minimum horizontal distance from
the right edge of the appliance to a
combustible surface:
50 mm.
Minimum horizontal distance from
the left edge of the appliance to a
combustible surface:
50 mm.
Safety distances
Minimum safety distances
underneath the SmartLine
appliance
To ensure proper ventilation of the
SmartLine appliance, a minimum
clearance is required between the
appliance and an oven, interim shelf, or
drawer.
The minimum clearance from the lower
edge of the SmartLine appliance to
– the top edge of an oven is 15 mm.
– the top edge of an interim shelf is
15 mm.
– the base of a drawer is 75 mm.
Interim shelf
It is not necessary to fit an interim shelf
underneath the SmartLine appliance,
but one may be fitted if you wish.
Leave a gap of 10 mm at the back of
the shelf to accommodate the mains
connection cable. We recommend a
gap at the front of the SmartLine
appliance of 20 mm to ensure good
ventilation.
43
Advertisement
Table of Contents
