Surround Mode Chart - Harman Kardon AVR 110 Owner's Manual

Operation

Surround Mode Chart

MODE FEATURES
DOLBY DIGITAL Available only with digital input sources encoded with Dolby Digital data. It provides
up to five separate main audio channels and a special dedicated Low-Frequency Effects
channel.
DTS Available only with digital input sources encoded with DTS data. Available on special
DVD, LD and audio-only discs, DTS provides up to five separate main audio channels and
a special dedicated low-frequency channel.
DOLBY PRO LOGIC The standard mode for analog surround-sound decoding. It uses information encoded
in a two-channel stereo recording to produce four distinct outputs: Left, Center, Right and
a Mono Surround channel. Use this mode for accurate reproduction of programs bearing
the Dolby Surround, DTS Stereo, UltraStereo or other "Surround" logos. Surround-encoded
programs include videocassette, DVD and LD movies, TV and cable programs, radio
programs and audio CDs. Dolby Pro Logic processing may also be used to provide a
pleasing surround effect with some stereophonic source material that does not carry
surround encoding.
LOGIC 7 C Logic 7 is an advanced mode that extracts the maximum surround information from either
LOGIC 7 M surround-encoded programs or conventional stereo material. The Logic 7 C or Cinema mode
should be used with any source that contains Dolby Surround or similar matrix encoding.
Logic 7 C delivers increased center-channel intelligibility, and more accurate placement of sounds
with fades and pans that are much smoother and more realistic than with other decoding
techniques. The Logic 7 M or Music mode should be used with analog or PCM stereo sources.
Logic 7 M enhances the listening experience by presenting a wider front soundstage and greater
rear ambience. Both Logic 7 modes also direct low-frequency information to the subwoofer
(if installed and configured) to deliver maximum bass impact.
DOLBY 3 STEREO Uses the information contained in a surround-encoded or two-channel stereo program to
create center-channel information. In addition, the information that is normally sent to the
rear-channel surround speakers is carefully mixed in with the front-left and front-right
channels for increased realism. Use this mode when you have a center-channel speaker
but no surround speakers.
THEATER Surround processing uses matrix surround decoding to simulate a standard movie or
stage theater.
HALL 1 The Hall mode offers a matrix surround choice that simulates a medium-sized chamber hall.
VMAx Near When only the two front-channel loudspeakers are used, Harman's patented VMAx mode
VMAx Far delivers a three-dimensional sound space with the illusion of "phantom speakers" at the
center and surround positions. The VMAx N, or "Near Field" mode should be selected when
your listening position is less than five feet from the speakers. The VMAx F, or "Far Field" mode
should be selected when your listening position is greater than five feet from the speakers.
5-Channel Stereo This mode takes advantage of multiple speakers to place a stereo signal at both the front and
back of a room. Ideal for playing music in situations such as a party, it places the same signal
at the front-left and surround-left, and front-right and surround-right speakers. The center
channel is fed a summed mono mix of the in-phase material of the left and right channels.
SURROUND This mode turns off all surround processing and presents the pure left- and right-
OFF (STEREO) channel presentation of two-channel stereo programs.
22 OPERATION
DELAY TIME RANGE
Center: 0 ms – 5 ms
Initial Setting – 0 ms
Surround: 0 ms – 15 ms
Initial Setting – 0 ms
Delay time not adjustable
15 ms – 30 ms
Initial Setting = 15 ms
Delay time not adjustable
No surround channels
Delay time not adjustable
Delay time not adjustable
No surround channels
No delay is available for
this mode
No surround channels