Omron E3S-LS10XE4 2M Manual page 14

Slit (Order Separately)
E39-S2
E39-S1
Note: The dimensions in parentheses are for when the Spacer is not used.
* With the E3S-2E4 (41), use the Spacer as shown in the figure above so that the supporter
and Mounting Bracket will not be struck when the optical axis is adjusted.
With the E3S-5E4 (41), the Spacer is not particularly required. Use the Spacer, however, to directly mount both the E3S-2E4 (41) and -5E4 (41).
13
17.8
17.9
(16.7)
E39-S2
20
1.2
22.4
23.4
(22.2)
E39-S2
In the interest of product improvement, specifications are subject to change without notice.
10.5
1.8
1.2
*Spacer
8.3
2.1
*Spacer
E3S
Slit E39-S2
Applicable E3S-2E4
Sensors E3S-2E41
Note 1. Three sets of slits are provided:
6.5 x 0.5 mm, 6.5 x 1 mm and 6.5 x
2 mm
2. One set consists of two slits, one
each for the Emitter and Receiver.
Slit E39-S1
Applicable E3S-5E4
Sensors E3S-5E41
Note 1. Four sets of slits are provided:
11 x 0.5 mm, 11 x 1 mm, 11 x 2 mm,
and 11 x 4 mm
2. One set consists of two slits, one
each for the Emitter and Receiver.
14