Advertisement
T6634-TE21/22 LCD Digital Fan Coil Thermostat (Modulating/Floating) - Installation Instructions
T6634-TE21/22 液晶数字式风机盘管温控器 (调节型/浮点型) -安装说明
可选用的型号
T66-TE-9JS0, 调节控制
T66-TE-9JS0, 浮点控制
T66-TE-9JR0, 调节控制（外接温度传感器）
技术参数
请参考产品说明书。
重要:
T6000系列温控器仅用作在线电压风机盘管控制使用。当T6000系列温控器调节
装置失灵或故障时可能会导致人员伤害，财产损失及其它配备损坏。增加预防
措施, 如常使用监控及报警系统、电压保护开关等，在安装系统中。来加强此温
度调节装置的机能失常和失效时的保护。
不要把温控器装在结露、潮湿或有湿气处。湿气会损坏温控器。
不要把封入前盖的PCB板移出，从前盖中把封入的PCB板拆卸移出将不再享有质
保服务。
使所有接线符合国家、地区和当地的规定。不要超过T6000系列温控器电流
容量。
警告:
在进行电器接线时确保电源断开。在带电时连接各部件可能引起电击，从而导致
人员受伤甚至死亡。
电击危险
按照国家、地区和当地的规定给温控器接地。接地失效可能导致电击和人员伤亡
甚至死亡。
电击危险和财物损坏
在温控器通电前把未使用的线头保护好，使之绝缘。任何一个未使用的线头未被
绝缘和保护可能导致财产损坏，电击和人员伤亡甚至死亡。
注意:
在所以的接线未检查好之前，不要给系统通电。短路或不正确的接线可能导致设备
永久性的损坏。
601V-B02A-NC Rev 4-Issue Date 11 2012
Ordering Information
T66-TE-9JS0, modulating application
T66-TE-9JS0, floating application
T66-TE-9JR0, modulating application (remote temperature sensor)
Specifications
Refer to Product Catalog for Details.
IMPORTANT：
Use this T6000 Series Line Voltage Fan Coil Thermostat only as an operating
control. Where failure of malfunction of the T6000 Series Thermostat could
lead to personal injury or property damage to the controlled equipment or other
property, additional precautions must be designed into the system. Incorporate
and maintain other devices such as supervisory or alarm systems or safety or
limit controls intended to warn of, or protect against, failure or malfunction of the
T6000 Series Thermostat.
Do not install this thermostat in condensing, wet, or damp environments. Moisture
may cause damage to the thermostat.
Do not remove PCB from the enclosure cover. Removing the PCB from the
enclosure cover voids the product warranty.
Make all wiring connections in accordance with local, nation, and regional
regulations. Do not exceed the T6000 Series thermostat's electrical ratings.
WARNING:
Disconnect power supply before making electrical connections. Contact with
components carrying hazardous voltages can cause electrical shock and may result
in severe personal injury or death.
Risk of Electrical Shock
Ground the thermostat according to local, national, and regional regulations.
Failure to ground the thermostat may result in electrical shock and severe personal
injury and death.
Risk of Electrical Shock and Property Damage
Insulate and secure each unused wire lead before applying power to the
thermostat. Failure to insulate and secure each unused wire lead may result
property damage, electrical shock, and severe personal injury or death.
CAUTION:
Do not apply power to the system before checking all wiring connections. Short
circuited or improperly connected wires may result in permanent damage to the
equipment.
Advertisement
