Final Gear Oil - Yamaha WOLVERINE YXE70WPXH Owner's Manual

Table of Contents

Advertisement

15. Turn the engine off, wait at least 10 minu-
tes, and then check the oil level and cor-
rect it if necessary.
16. Install the rubber cover.
17. Install the passenger seat cushion.
EBU36050

Final gear oil

Check the oil level and change the final gear
oil at the intervals specified in the general
maintenance and lubrication chart.
Checking the final gear oil level
1. Park the vehicle on a level surface.
2. Remove the final gear oil filler bolt and its
8
gasket, and then check the oil level in the
final gear case. The oil level should be at
the brim of the filler hole.
1. Final gear oil
2. Gasket
3. Final gear oil filler bolt
4. Correct oil level
3. If the oil is below the brim of the filler hole,
add sufficient oil of the recommended
type to raise it to the correct level.
NOTICE: Be sure no foreign material
enters the final gear case.
4. Check the gasket for damage, and re-
place it if necessary.
5. Install the oil filler bolt and its gasket, and
then tighten the bolt to the specified
torque.
8-20
1
2
3
4
[ECB00422]

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wolverine yxe70wphhWolverine yxe70wpah

Table of Contents