Yamaha WOLVERINE YXE70WPXH Owner's Manual page 137

1. Coolant reservoir cap
2. Maximum level mark
3. Minimum level mark
3. If the coolant is at or below the minimum
level mark, remove the coolant reservoir
cap, add coolant to the maximum level
mark, and install the reservoir cap.
Coolant reservoir capacity (up to the maxi-
mum level mark):
0.28 L (0.30 US qt, 0.25 Imp.qt)
Changing the coolant
EWB01891
1
WARNING
Wait for the engine and radiator to cool be-
fore removing the radiator cap. You could
2
be burned by hot fluid and steam blown
out under pressure. Always place a thick
3
rag over the cap when opening. Allow any
remaining pressure to escape before com-
pletely removing the cap.
1. Park the vehicle on a level surface.
2. Remove the hood. (See page 8-10 for
hood removal and installation proce-
dures.)
3. Place a container under the engine to col-
lect the used coolant.
4. Remove the radiator cap.
8-25
8