The Flash Doesn't Work; The Recorded Image Is Blurry; The Recorded Image Is Too Dark - AGFA ePhoto 780 User Manual

Troubleshooting (cont.)

The flash doesn't work.

The flash may be turned off. Check the
The batteries may be too weak. Replace them.

The recorded image is blurry.

You or the subject may have moved while you were taking the picture. Hold the camera
steady and take the picture again.
You may have moved the camera before the image was captured. Hold the camera steady
and take the picture again.

The recorded image is too dark.

There may not be enough light.
The subject may be too far away for the flash. The flash illuminates subjects up to a dis-
tance of only about 8.5 feet (2.6 m).
Use PhotoWise to adjust the brightness and contrast of your image (see the .pdf file
PhotoWise Tips or on-line help in PhotoWise itself).
39
39
flash setting.
Set the flash to the Auto or Forced setting.