Operational Functions - Haier XQG50-800TXB Operation Manual

Washing Methods
1. Laundry loading
Evenly load the laundry in the
washing machine and then tightly
close the door of the washing
=Blended
machine
Note: 1) When first using the
fabric clothes
washing machine, let it run un-
(800g)
loaded for one program to pre-
vent the laundry from being
(cotton
tainted by oil or dirty water from
300g)
the washing machine. 2) Do not
==== =Jackets
overload the washing machine.
(cotton 800g)
2. Use of detergent
Pull out the detergent drawer, put required detergent, soften-
ing agent and bleaching agent into the corresponding boxes.
Push back the drawer gently.
Caution: 1) Do not add liquid detergent into box 1 and 2
2) For pre-washing program, detergent should
be added to both box 1 and 2; for other
programs, do not add detergent to box 1
3) Do not overuse softening agent as this may
damage artificial fabrics.
3. Washing program setting
Set the wash program correctly in accordance with the laundry load.the methods for
setting wash programs are indicated on the handle of the distributor on the washing
machine.turn the program knob clockwise to the desired program.
Caution: Turn off the power before setting the wash program.
10
Reference loading
= Overalls = Jeans (800g)
(cotton 950g)
Pajamas (200g)
=== =Shirts
(300g)
=shirt
== =Underwear
(blended fabrics 70g)
=Socks
(blended fabrics 50g)
=Single bed
=
Woolen blankets
sheets
(3000g)
(cotton 800g)

Operational Functions

D Speed button
When this button is pressed, the spining speed will be reduced , the
speed will reduce from 800r/min to 500r/min.
E Anti-crease
When this button is pressed, the machine will automatically stop
running at " " position synthetic fabrics and wool fabrics washing
cycle, and the laundry is soaked in water. Release this button, the
program will stop after the spinning cycle ends. Using this function
can reduce the creasing of valuable clothes from spinning.
F Power button
Press the button ,washing machine will working;release the button,the
washing machine will stop.
G Power light
The light will illuminates when the power supply is connected.
500
800
ON
OFF
7