Download Print this page

Haier XQG50-S1016 Operation Manual

Haier automatic drum washing machine operation manual

Advertisement

Quick Links

Technica specifications
Model
Item
Main power
Max working current(A)
Water pressure(MPa)
Washing power(W)
Spining power(W)
Washing capcity(Kg)
Spinning speed(rpm)
Drying power(W)
Size(high,depth,width)mm
Weight(Kg)
XQG50-S1016
220V~/50Hz
10
0.05 P 1
300
700
5
1000/800/600
1000
850 550 595
78
Automatic Drum Washing Machine
XQG50-S1016

Table of Contents

Before using
Names of parts---------------inside front cover
Matters needing attention-------------------1-3
Installation---------------------------------------4-5
Control panel--------------------------------------6
Operational functions-------------------------6-7
During using
Program selection-----------------------------8-9
Preparations-------------------------------------10
Washing methods------------------------------11
Additional information-------------------------12
Maintenance
Maintenance-------------------------------------13
Warning code------------------------------------14
Trouble shooting--------------------------------15
Warning-------------------------------------------16
Wiring circuit-------------------------------------17
Technical specification------------Back cover

Advertisement

loading

Summary of Contents for Haier XQG50-S1016

  • Page 1: Table Of Contents

    Technica specifications Model XQG50-S1016 Item Main power 220V~/50Hz Max working current(A) Water pressure(MPa) 0.05 P 1 Washing power(W) Spining power(W) Washing capcity(Kg) Spinning speed(rpm) 1000/800/600 Drying power(W) Size(high,depth,width)mm 850 550 595 Weight(Kg) Automatic Drum Washing Machine XQG50-S1016 1000 Table of Contents...
  • Page 2: Names Of Parts

    This diagram may vary slightly with the layout of the washing machine you have just purchased due to technical inprovements. Electronic system diagram Table cover interference eliminator Washer door A:heater1 Drainage hose clip D:water inlet electromagnetic valve for pre-washing Packing bolt(3) E:water inlet electromagnetic valve for main washing...
  • Page 3 Warning 1.If the supply cord is damaged, it must be replaced by a special cord or assembly available from the manufacturer or its service agent. 2.If a stationary appliance is provided, with a supply cord and a plug, the instructions shall state that the appliance must be positioned so that the plug is accessible.
  • Page 4: Matters Needing Attention

    Matters needing attention 8.The washing machine must not be used in 9. The washing machine should be placed the open or in an area of high humidity as in a well-ventilated area, leaving a space water droplets may form on the electrical between the appliance and adjacent walls or components.
  • Page 5 Warning code Warning Abnorma item Content of identification Action to take code The water level can not Warning and reach the reset water stop running level within 5 minutes Water supply The water level can not Warning and reach the setting water stop running level within 8 minutes The water level can not...
  • Page 6: Installation

    Installation As shown in Fig.1, remove all the packing materials ( in cluding the foam base ). It is normal that there are some water drops on the plastic bag, the cushion and the porthole. It is because of the water testing before leaving the factory.
  • Page 7 Additional information Tips Adding the soften agent can help the laundry to get rid of the static electricity and make the cloths feel softly and easy to iron. The following list shows the drying time for the different quantity and kinds of the laundry.
  • Page 8: Control Panel

    Control panel Door lock Remaining time:Min Water level WATER Standard DELAY TEMP PREWASH LEVEL Habit Quick Night Heavy Standard Delicate 60min Time 30min PROGRAMME WASH RINSE DRAIN A. POWER ON/OFF Touch this button to swith on the power if the machine is not on power, and touch this button to switch off the power if the machine is on power.
  • Page 9: Operational Functions

    Preparations Power supply Water supply Plug in the power supply Turn on the tap ensure that the 220V/50Hz water is clear. Caution: Before starting the washing machine turn on the water faucet to ensure that the water faucet and the water inlet hose are connected correctly and do not leak.
  • Page 10: Program Selection

    Program selection Program Suitable Wash ( min ) Option Quantity name condition Default add 12 minutes Prewash for dirty cloth below 5 kg washing wash/rinse below 5 kg /spin wash/rinse ordinary cloths Standard below 2.5 kg /spin/dry washing wash/rinse below 1 kg /spin/dry wash/rinse self defined...