XQG50-QF800TX(SS) Automatic Drum Washing Machine Table of Contents Before using Names of Parts--------------inside front cover Matters Needing Attention--------------------1-3 Installation----------------------------------------4-5 Control Panel---------------------------------------6 Operational Functions------------------------6-7 During using Program Selection--------------------------------8 Preparation-----------------------------------------9 Washing Methods---------------------------10-11 Maintenance Maintenance--------------------------------------12 Trouble Shooting--------------------------------13 Technical Specification-------------------------14 Wiring Circuit-------------------------------------15 0020503207...
Names of Parts Detergent distributor Temperature knob Door Porthole Power supply cable Earth terminal Back plate screw (3) Drainage hose Caution and Warning symbols For your safety, any instructions in this manual with this "Warning" sign shall be strictly followed. For your safety and to prevent damages to the washing machine, any instructions in this manual with this "Stop"...
Matters Needing Attention Safety 1. A separate earthed socket is required 2. Hold the plug and not the electric cable for the power supply. After installation when unplugging the washing machine. of the washing machine,the power plug should be accessible during the normal wash.
Page 4
Matters Needing Attention 8. The washing machine must net be used 9. The washing machine should be place in the open or in area of high moisture as in a well ventilated area maintaing a water droptets may form on electrical space between walls or furniture.
Page 5
Technical Specification Model Item Power supply Maximum working current Water pressure (MPa) Washing power Spinning power Max. washing load (kg) Spinning speed (r/min) Washing program Heating power Size (HXDXW) (mm) Weight (kg) Matters Needing Attention Never place heavy objects ,a heating applianceor a water container on the top panel of the washing machine.
Installation As shown in figure1 remove all the packing materials (including the foam base). Check attachments and materials. Name Operational Quality Water Drainage Plastic Qu'ty manual certificate hose holder plugs Model XQG50- QF800TX(SS) Remove the packing screws as shown in figure 2. The packing bolts protect the appliance from shock during trans- portation The steps betow should be followed before using the appliance,...
Page 7
Check the following items before connection to the power supply. socket and power supply cable should not be less than 15A). compatible ,Refer to a washing machine technician or a Haier designated service point for power cable replacement. The washing machine should be connected to an earth before Replace the rubber Insert the bolts.
Washing Methods 1. Laundry loading Overalls Evenly load the laundry in the washing (cotton 950g) machine and then tightly close the door Blended of the washing machine fabric clothes (800g) Note: 1) When first using the washing machine, let it run unloaded for one pro- shirt gram to prevent the laundry from being (cotton...
Program Selection Detergent Program Program laundry in compart- Setting time (min) ment 1 white laundry Pre wash 19.5 Non-fade cotton Wash light soil Cotton Rinse cycle Soften Spin Washing machine will stop Non-fade light Wash 43.5 soil Rinse 19.5 Synthetic Soften cycle Spin...