Mitsubishi AJ65SBT2B-64RD3 User Manual page 5

[Wiring Precautions]
Do not install the control cable(s) together with the communication cable(s).
Doing so may cause malfunctions due to noise.
When disconnecting the cables from the module, do not hold and pull the
cable part.
Disconnect the cables after loosening the screws in the portions connected
to the module.
Pulling the cable that is still connected to the module may damage the
module and/or cable and cause malfunctions due to poor cable connection.
[Starting and Maintenance Precautions]
Do not touch the terminals while the power is on.
Doing so may cause malfunction.
Be sure to shut off all phases of the external power supply used by the
system before cleaning or retightening the terminal screws.
Not doing so can cause the module to fail or malfunction.
Undertightening can cause a drop, short circuit or malfunction.
Overtightening can cause a drop, short circuit or malfunction due to damage
of the screws or module.
Never disassemble or modify the module.
This may cause breakdowns, malfunction, injury and/or fire.
Do not drop or apply any strong impact to the module.
Doing so may damage the module.
Be sure to shut off all phases of the external power supply used by the
system before mounting or dismounting the module to or from the panel.
Not doing so can cause the module to fail or malfunction.
Do not install/remove the terminal block more than 50 times after the first use
of the product. (IEC 61131-2 compliant)
Before handling the module, always touch grounded metal, etc. to discharge
static electricity from the human body.
Failure to do so can cause the module to fail or malfunction.
[Disposal Precautions]
When disposing of this product, treat it as industrial waste.
CAUTION
CAUTION
CAUTION
A-4