Table of Contents
Advertisement
(1) Tighten the module fixing screws and terminal block screws within
the following ranges.
Screw location
Module fixing screw (M4 screw)
Terminal block terminal screw (M3 screw)
Terminal block installation screw (M3.5 screw)
(2) When using the DIN rail, pay attention to the followings.
(a) Applicable DIN rail type (Compliant with IEC 60715)
(b) DIN rail installation screw pitch
(3) When mounting the AJ65SBT2B-64RD3 to the DIN rail, press with
your finger the centerline of the DIN rail hook at the bottom of the
module until it clicks.
(4) Refer to the Master Module user's manual for the name,
specification, and manufacturers of supported cables for the use
with AJ65SBT2B-64RD3.
Table 4.1 Tightening torque range
TH35-7.5Fe
TH35-7.5Al
When installing a DIN rail, tighten the screws at a pitch of
200mm or less.
DIN rail
DIN rail hook
Figure 4.1 Installation to DIN rail
Tightening torque range
78 to 108N•cm
59 to 88N•cm
68 to 98N•cm
10
Advertisement
Table of Contents
