Washing Sequence - Haier HWM50-23BS User Manual

Twin-tub washing machine
Hide thumbs Also See for HWM50-23BS:
Table of Contents

Advertisement

Washing sequence

Wash timer
(To set to below 2 minute,
first set to 5 minute then
turn it back. it can increase
the service life of the timer).
WASH SELECTOR
WASH TIMER
OFF
SILK
WOOL
COTTON
LINEN
Wash
1. Select water level
Set the water level adjusting lever to needed line.
Please do not over the topmost water level
(Figure 1)
2. Fill the water and add the dissolved washing
powder to make the water level reach the preset
position. (Figure 2)
Run washing program for some time to stir and
dissolve the powder completely.
3.Put in the laundries. If the water quantity is
insufficient, please add water.
4.Select the current.
Select the strength of the current according to
the laundries. (Figure 3)
5.Select the washing time
Select the washing time according to the laundries.
(Figure 4)
6.After washing, the buzzer will ring. Set the "WASH
SELECTOR" at "DRAIN". (Figure 5).
Note:
Please do not inlet over the topmost water level
8
Wash selector
Water-filling entrance
(Soft current,
strong current)
STRONG
SOFT
DRAIN
Spin timer
(to set to below 1 minute,
first set to 2 minute then
turn it back. it can increase
the service life of the timer).
SPIN TIMER
OFF
SILK
WOOL
Topmost water level
Maximum Max
Med
Medium
Min
Minimum
WASH SELECTOR
STRONG
SOFT
WASH TIMER
WASH SELECTOR
STRONG
SOFT
Figure 1
Figure 2
DRAIN
Figure 3
OFF
SILK
WOOL
Figure 4
COTTON
LINEN
DRAIN
Figure 5

Advertisement

Table of Contents
loading

Table of Contents