Table of Contents
Advertisement
Washing sequence
Water inlet
(To set to below 2 minute,
first set to 6 minute then
turn it back. it can increase
the service life of the timer).
Wash
1. Fill the water and add the dissolved washing
powder to make the water level reach the preset
position. (Figure 1)
Run washing program for some time to stir and
dissolve the powder completely.
2.Put in the laundries. If the water quantity is
insufficient, please add water.
3.Select the current.
Select the strength of the current according to
the laundries. (Figure 2)
4.Select the washing time
Select the washing time according to the laundries.
(Figure 3)
5.After washing, set the "WASH
SELECTOR" at "DRAIN". (Figure 4).
Wash timer
OFF
¹Ø
15
3
STANDARD
12
6
9
9 Âé
WASH TIMER
Wash selector
(standard current,
strong current)
STRONG
DRAIN
WASH SELECTOR
STANDARD
WASH SELECTOR
WASH TIMER
WASH SELECTOR
8
Spin timer
(to set to below 1 minute,
first set to 2 minute then
turn it back. it can increase
the service life of the timer).
OFF
¹Ø
5
1
4
2
3
SPIN TIMER
Figure 1
STRONG
DRAIN
Figure 2
OFF
¹Ø
15
3
12
6
9
Figure 3
STRONG
DRAIN
Figure 4
Advertisement
Table of Contents
