Page 1
Fuzzy Computerized Automatic Washing Machine This manual is for HWM50-10H Please read this manual carefully before using. Retain it for future reference. User's manual...
Contents Names of the parts...1 Safety precautions ... 2 Installation and adjustment ...4 Preparation before washing ...8 Put in the laundries ... 9 Usage of the detergent ... 9 Use the operation buttons ..10 Close the top lid ... 14 Finish washing ...14 Disposal after washing ...
Names of the parts Top lid B Detergent box Lint filter(Installed by user) Lint filterA(Installed by user) Control panel Filter cover Inner tub Pulsator Control panel film Cabinet base frame Meaning and description of the symbols Contents marked with that symbol are related to the safety Warning sign of the product and the personal safety of the users.
Safety precautions Please insert the power cord into special receptacle with rated voltage. Be sure to use single-phasethree pins receptacle. Ensure the earthing prong of the power receptacle is earth edreliably. Use leakage protector if possible. Do not damage the power cord, bend ,extend, twist, bind or alter it by force. Do not press or nip it with weight.
Page 5
Safety precautions Do not stretch hands into the working machine. It is dangerous even if the rotation is slow. Take special care of the children. Do not let the children climb the washing machine. Do not put any hot or heavy items (such as the kettle with hot water ) on the washing machine.
Installation and adjustment Please install and adjust the machine according to the requirement of the manual. It is very important to your security and correct operating the machine. Install the lint filter Push lint filter downward to l ocation for lint filter Install Install Adjust the installation position...
How to change the direction of the drain hose Dismount the back cover of the washing machine. drain hose rack Figure 1 Take off the drain hose frame. Put down the drain hose. Take off the drain hose rack. As indicated in Figure 1 Pull the drain hose into the cabinet from the left side of the bottom (as figure 2).
Install the water inlet hose Confirm the water tap Water tap, suitable Outlet end surface It is required that the front end shall be longer than 10mm. The outlet end surface of the tap shall be flat and smooth. If not please file it to avoid leakage.
Connection between the water inlet hose and the washing machine 1.Do not take off the water absorption cushion. Please check if the cushion is dropped or damaged before each usage. If it happens please contact our after-sale department immediately. 2.Put the nut of the water inlet hose on the valve jointer.
Preparation before washing Pay attention to followings before washing the laundries Confirm Clear the pocket. there's special Take out the requirement for coins , sand, the laundries. hairpins etc. a. Please check if the laundries are applicable for washing. b. Separate those not colorfast from other laundries. c.
Put in the laundries Usage of the detergent Inlet box of the detergent How to use the whitener Fill water to decided level. Dilute the whitener with container. Pour it slowly into the washing tub. Avoid using whitener on laundries with color or pattern as they are prone to lose color.
Use the operation buttons Description of the function of the buttons " WATER LEVEL"button The user selects a suitable water level depending on the load. If "Quick" wash is selected, water level will indicate "2". After water level reaches "2", it will wash while water filling, and wash normally upon the water level reaching "4".
Page 13
SURPLUS(MIN) To indicate -- during sensing. To indicate remaining min. During program running. To indicate remaining reserved time (hrs) during reservation period. To indicate fault symbols for abnormal conditions (see page 16) Page 16 SURPLUS MIN RESERV ATION CALEFACTION Press RESERVATION/CALEFACTION "...
Page 14
b.Operating procedure and explanations for the buttons STANDARD JEANS GENTLE QUICK WASH WATER LEVEL PROGRAM SELECTION SELECTION 1 Press the "POWER ON/OFF" button to switch on the power supply After switching on, the washing machine heating function will be automatically set inactive. In order to select heating function, the "...
Page 15
3 Press the button of "PROCEDURE SELECTION" to select suitable processes. After the power is switched on, the washing machine will automatically set a normal program comprising of processes of "Wash, Rinse and Spin" . If other program is desired, press the button of "Process" to select one or several process of soak, wash, rinse and spin.
4 Press the "WATER LEVEL" button to select suitable water level After switching on the power, press the button "WATER LEVEL" to select a water level according to the load. Please refer to the button " Water level" on page 10. 5 Push the "...
Disposal after washing After using, please clean the lint and foreign materials of the lint filter etc. in time. Otherwise it may influence your using the machine. Please first pull off the power plug from the receptacle before cleaning. The lint filter must be used during washing. It must be cleaned in time after each using.
Trouble shooting Answer to question (If there's breakdown, please pull off the power plug before checking) The following phenomena are not breakdowns sometimes. Please confirm again before sending it to repair. If there are real breakdowns, please come to the special maintenance department or after-sale service department of our company.
Packing list Name Quantity User's manual Warranty Card Components of the water inlet hose Lint filter Lint filter A Bottom plate Tapping screws Fuzzy computerized automatic washing machine Specification Water level/Water quantity (about) 0.03MPa-0.78MPa Water inlet pressure Rated washing / 5.0 kg (weight of standard dry cloth) spinning capacity(kg) Storage position...