Page 1
Full Automatic Washing Machine with Pump User's manual This manual is for HWM55-10 Please read this manual carefully before using. Retain it for future reference. 0030806972C...
Contents Names of the parts...1 Safety precautions ...2 Installation and adjustment ...4 Preparation before washing ...7 Put in the laundries ...8 Usage of the detergent ...8 Use the operation buttons ...9 Close the top lid ...13 Finish washing ...13 Disposal after washing ...14 Trouble shooting Answer to question...15 Packing list *Specifications...16...
Names of the parts Top lid B Detergent box Lint filter (Installed by user) Control panel Filter cover Inner tub Pulsator Control panel film Cabinet ase frame Meaning and description of the symbols Contents marked with that symbol are related to the Warning sign safety of the product and the personal safety of the users.
Safety precautions Please plug the plug on special receptacle with rated voltage. Be sure to use single- phase three pins receptacle. Ensure the earthing prong of the power receptacle is earthed reliably. Use leakage protector if possible. Do not damage the power cord, bend , extend, twist, bind or alter it by force. Do not press or nip it with weight.
Page 5
Safety precautions Do not stretch hands into the working machine. It is dangerous even if the rotation is slow. Take special care of the children. Do not let the children climb the washing machine. Do not put any hot or heavy items (such as the kettle with hot water ) on the washing machine.
Installation and adjustment Please install and adjust the machine according to the requirement of the manual. It is very important to your security and correct operating the machine. Install the lint filter Push the lint filter downward to location for lint filter. Adjust the installation position The largest allowed slope of the shank base of the machine is 2 .
Page 7
How to change the direction of the drain hose Dismount the back cover of the washing machine. Drain hose rack Figure 1 Take off the drain hose frame. Put down the drain hose. Take off the drain hose rack. As indicated in Figure 1 Pull the drain hose into the cabinet from the left side of the bottom (as figure 2).
Install the water inlet hose 1. Attach the water inlet hoses to the water faucet. Using pliers, tighten the coupling. ( As figure 1) NOTE: Do not over tighten. Damage to the valves can result. 2. Connect the other ends to the water inlet valve . ( As figure 2) Figure 1 Check the connection between the jointer of...
Preparation before washing Pay attention to followings before washing the laundries Confirm Clear the pocket. there's special Take out the requirment for coins , sand, the laundries. hairpins etc. a.Please check if the laundries are applicable for washing. b.Separate those not colorfast from other laundries. c.For laundries not water absorbing, please put them into water with hands.
Put in the laundries Usage of the detergent Inlet box of the detergent How to use the whitener Fill water to decided level. Dilute the whitener with container. Pour it slowly into the washing tub. Avoid using whitener on laundries with color or pattern as they are prone to lose color.
Use the operation buttons A.Description of the function of the buttons The use selects a suitable water level depending on the load. If QUICK WASH is selected water level will indicate 2 .After water level reaches 2,it will wash while water filling, and wash normally upon the water level reaching After washing for q min, pressing WATER LEVEL button will enable supplemental water filling, which will stop automatically upon the...
Page 12
START/PAUSE button After the power is switched on, press it to start the machine. During working, push it to pause. During pause, push this button to restart and go on working. SURPLUS(MIN) To indicate -- during sensing. To indicate remaining min. During program running.
Page 13
B.Operating procedure and explanations for the buttons STANDARD JEANS GENTLE QUICK WASH WATER LEVEL SELECTION PROGRAM SELECTION 1.Push the POWER ON/OFF button to switch on the power 2.Push the PROGRAM SELECTION button to select the suitable automatic program After switching on the power, the machine will set to STANDARD program automatically. To select other program, push the PROGRAM SELECTION button till the corresponding indicator is on.
Page 14
Attention Even there's no water in the tub, the spinning will start after a certain period. Do not use soak process for woolen Wash the laundries that are prone to lose colors separately from other laundries. The pulsator will not rotate unless the water is filled to selected water level.
Time list of Each Program(minutes) Wash Water Program (minute) level Standard About 13 15 About 13 15 Jeans About 3 Gentle About 4 About 3 Quick wash Total time: including the normal water inlet time and drain time. Spin time: the time from intermittent running to finishing. * The STANDARD and JEANS automatic programs can be fitted with soaking.
Disposal after washing After using, please clean the lint and foreign materials of the lint filter etc. in time. Otherwise it may influence your using the machine. Please first pull off the power plug from the receptacle before cleaning. The lint filter must be used during washing. It must be cleaned in time after each using.
Trouble shooting Answer to question (If there's breakdown, please pull off the power plug before checking) The following phenomena are not breakdowns sometimes. Please confirm again before sending it to repair. If there are real breakdowns, please come to the special maintenance department or after-sale service department of our company.
Packing list Name User's manual Components of the water inlet hose The side of connection between the water inlet hose and the washing machine The side of connection between the jointer of the water inlet hose and the water faucet Lint filter Bottom plate Tapping screws...