Table of Contents
Advertisement
Chapter 2 Configuring and Upgrading the System
5.6.3 Replacing CPU
Take the steps below to replace the failed CPU.
1.
Identify the failed CPU by ftsmaint command.
2.
Remove the CPU/IO module referring to Chapter 2 (5.4.1 Removing CPU/IO Module).
3.
Install the new heat sink and CPU.
4.
Refer to Chapter 2 (5.4.2 Installing CPU/IO Module) and install the CPU/IO module.
5.
Start the CPU/IO module from the ftsmaint command.
Express5800/R320d-E4, R320d-M4 Maintenance Guide (VMware 5.5)
5. Installing Optional Devices
141
Advertisement
Table of Contents
