Crushed Glass Installation (See Manual For Additional Details) - FireplaceXtrordinair 94500975 Instructions Manual

Crushed Glass Installation (see manual for additional details).

Do not allow the crushed glass to block the air slots or to become too thick (maximum 1
layer deep on the burner). Failure to properly install glass may lead to sooting and
improper burning.
Quantity of Crushed Glass
Before installing the crushed glass, make sure the pilot guard is in place (it is zip-tied to the glass tray – remove and
discard the zip-tie). After installing the glass, remove the pilot guard. Make sure no glass covers the pilot opening.
Pilot Guard
Disperse the crushed glass evenly along the glass tray.
Make sure the two air channels are free of crushed glass. Use the glass frame tool (or screwdriver) to clear this area.
Make sure the glass is only one layer deep on the burner.
Page 29 of 30
HO Linear – Interim Driftwood Log Set
Instructions sku# 94500975
3615HO
4.5 lbs. (2 Kg)
— 11/13/19
17602100
4415HO
4 lbs. (1.8 Kg) 7 lbs. (3.1 Kg)
Remove pilot
guard after
placing glass
© Travis Industries, Inc.
6015HO