Preparing The Media Tray - 6015 New Style - FireplaceXtrordinair 94500975 Instructions Manual

Preparing the Media Tray – 6015 New Style
1. Remove the glass frame assembly to gain access to the firebox (see manual for details).
2. The map below shows the location of the log and stone locating tabs in relation to the media tray.
Look in the approximate location indicated and you will notice holes that are slightly smaller than the
others. The smaller holes will receive the screws that secure the log locating tabs to the media tray.
HINTS:

Lay all the locating brackets in their approximate location and orientation. Then go back with
a flashlight and screwdriver (with screws) to locate the attachment holes and secure the
brackets.

Do not to overtighten the screws when securing the log/stone locating tabs to the media tray.
KEY

L = Log Placement plate.

#xx tabs refer to the number stamped on the stone tab (and corresponding stone).

The arrow ( ) points to the bent up portion of the stone placement tab (see
illustration to the right).
#10
L L
L
Page 7 of 30
HO Linear – Interim Driftwood Log Set
Instructions sku# 94500975
L
L
— 11/13/19
17602100
#32
#35
L
© Travis Industries, Inc.
Small holes indicate
location of tabs
L
#13