Summary of Contents for FireplaceXtrordinair 96100873
Page 1
4237 Fireback Installation 96100873 Brick, 96100874 Herringbone, 96100875 Enamel Black, 96100877 Stacked Tan Brick Compatibility 4237 Fireplace (FIREBACKS ARE REQUIRED BEFORE OPERATING THE 4237 FIREPLACE) Packing List Rear Fireback (ceramic firebacks have 2 pieces - note orientation below) NOTE: The rear fireback of the Herringbone and the Stacked Tan kits have an arrow cast into the back.
Page 2
4237 Fireback Installation 96100873 Brick, 96100874 Herringbone, 96100875 Enamel Black, 96100877 Stacked Tan Brick Installation WARNING Turn off gas to the appliance and make sure it is cool prior to conducting service. The firebacks should be installed while finalizing the installation (before installing the logs).
Page 3
4237 Fireback Installation 96100873 Brick, 96100874 Herringbone, 96100875 Enamel Black, 96100877 Stacked Tan Brick Ceramic Firebacks: Place the lower rear fireback in place. While holding it in place, place the upper, rear fireback on top of it (continue to hold both in place).
Page 4
4237 Fireback Installation 96100873 Brick, 96100874 Herringbone, 96100875 Enamel Black, 96100877 Stacked Tan Brick Installation (continued) Place one side fireback in place. Secure with the two fireback clips. Repeat these steps for the remaining side fireback. Place the floor firebacks in place.