Panasonic PT-LB10NTU Service Manual page 9

4.1. Procedure to enter the service mode
Select "SERVICE MODE" on "EXT OPTION" menu and press "ENTER" button on the main unit
or remote control unit.
Note:
- In the service mode, pressing the up-arrow " " or down-arrow " "
button allows the test pattern selection and theleft-arrow " " or
right-arrow " " button the color selection (White / Red / Green /
Blue).
4.2. Canceling the service mode
Press "MENU" button on the main unit or remote control unit.
5. Flicker Adjustment Mode
If replacing the optical parts (Analysis / LCD / Lens block) of this projector and/or A-P.C.Board
(assembly), enter the flicker adjustment mode and minimize the flicker.
5.1. Procedure to enter the adjustment mode
Select "FLICKER ADJ" on "EXT OPTION" menu and press "ENTER" button on the main unit or
remote control unit.
Note:
"DESK setting (blue)" is displayed when entering the adjustment mode.
5.2. Adjustment Display and Contents
PDF created with pdfFactory Pro trial version
9
www.pdffactory.com