Removal Of Wl-P.c.board (Pt-Lb10Ntu / E Only); Removal Of S1-P.c.board; Removal Of S2-P.c.board; Removal Of K-P.c.board - Panasonic PT-LB10NTU Service Manual

PT-LB10NTU / PT-LB10NTE / PT-LB10U / PT-LB10E / PT-LB10VU / PT-LB10VE / PT-LB10SU / PT-LB10SE
7.4. Removal of WL-P.C.Board (PT-
LB10NTU / E only)
Remove the WL-P.C.Board according to the steps 1 through 6
in the section 7.3. "Removal of A-P.C.Board".
7.5.

Removal of S1-P.C.Board

1. Remove the upper case according to the section 7.2.
"Removal of Upper Case".
2. Remove the water guide plate.
3. Unscrew the 2 screws and remove the S1-P.C.Board.
7.6.

Removal of S2-P.C.Board

1. Remove the S2-P.C.Board block according to the section
7.3. "Removal of A-P.C.Board".
2. Remove the holder while expanding the resin hooks
outside.
Note:
· Work carefully not to damage the resin hook.
7.7.

Removal of K-P.C.Board

1. Remove the analysis block, LCD block and lens according
to the steps 1 through 3 in the section 7.11. "Removal of
Analysis Block and Lens".
2. Unscrew the screws (PT-LB10NTU/E: 1, Others: 3) and
remove the grounding metal.
3. Unscrew the 2 screws and remove the lamp unit terminal.
4. Unscrew the 2 screws and remove the exhaust fan and
speaker block.
5. Unscrew the 2 screws and remove the lamp house and
thermofuse attachmemt fittings.
6. Unscrew the 2 screws and remove the K-P.C.Board.
7.8.

Removal of B / Q-Module

1. Remove the A-P.C.Board block according to the steps 1
through 6 in the section 7.3. "Removal of A-P.C.Board".
2. Unscrew the screws (PT-LB10NTU/E: 1, Others: 3) and
remove the grounding metal.
16