Removal Of P-Module; Removal Of Lamp Unit - Panasonic PT-LB10NTU Service Manual

3. Unscrew the 2 screws and remove the lamp unit terminal.
4. Unscrew the 3 screws and remove the lamp house and
thermofuse attachment fittings.
5. Unscrew the 1 screws and remove the exhaust fan and
speaker block.
6. Unscrew the 4 screws and remove the B/Q-Module.
7.9.

Removal of P-Module

1. Remove the A-P.C.Board block according to the steps 1
through 6 in the section 7.3. "Removal of A-P.C.Board".
2. Unscrew the screws (PT-LB10NTU/E: 1, Others: 3) and
remove the grounding metal.
PT-LB10NTU / PT-LB10NTE / PT-LB10U / PT-LB10E / PT-LB10VU / PT-LB10VE / PT-LB10SU / PT-LB10SE
3. Unscrew the 4 screws and remove the P-Module.

7.10. Removal of Lamp Unit

1. Turn the projector upside down.
2. Loosen the 2 screws until they idle, remove the lamp unit
cover.
3. Loosen the 2 screws until they idle, remove the lamp unit
with the handle.
17