Panasonic PT-LB10NTU Service Manual page 21

7.10. Removal of Lamp Unit
1. Turn the projector upside down.
2. Loosen the 2 screws until they idle, remove the lamp unit cover.
3. Loosen the 2 screws until they idle, remove the lamp unit with the
handle.
Note:
- When installing the lamp unit (or a new one) in the main unit, place
it in a specified position and press the connector side and the
opposite side of the lamp unit (arrow positions shown in the figure
below), and confirm the lamp unit isinserted securely.
Then, tighten the 2 screws fixing the lamp unit, and attach the
lamp unit cover.
PDF created with pdfFactory Pro trial version
21
www.pdffactory.com