Panasonic PT-LB10NTU Service Manual page 7

more thanFAN CONTROL).
- AUTOSETUP
Setting AUTO SETUP mode
- STANDARD: To set the normal mode (the dot clock is adjusted
strictly))
- SPECIAL: To set the special mode (the dot clock is adjusted
roughly)
Note:
- Do not change the initial setting (STANDARD).
- SELF CHECK
To enter the self-check mode
- SERVICE MODE
To enter the service mode
- FLICKER ADJ
To enter the flicker adjustment mode
2.3. Canceling EXT OPTION
Press "MENU" button on the main unit or remote control unit.
3. Self-Check Mode
This mode is used to narrow down the location of the failure.
3.1. Procedure to enter the self-check mode
Select "SELF CHECK" on "EXT OPTION" menu and press "ENTER" button on the main unit or
remote control unit.
3.2. Self Check Display and Contents
PDF created with pdfFactory Pro trial version
7
www.pdffactory.com