Operating The Second And Third Toshiba Hdd/Dvd Video Recorders With The Remote Control Of This Recorder - Toshiba RD-85DTSB Owner's Manual

Basic setup
D: Remote control settings (Continued)

Operating the second and third TOSHIBA HDD/DVD video recorders with the remote control of this recorder

Switches the codes to operate the recorder.
If you use the second and third TOSHIBA HDD/DVD video recorders, set the different remote codes for each
recorder to avoid confusion in the response of the recorders.
Example: Setting this recorder's remote control mode to DR 2, after another HDD/DVD recorder has been
set to DR 1.
(It is necessary to set the remote control mode on both the recorder and the remote control.)
Start
36
RD-85DT_instE_30-39
Setting up the recorder
1
Press SETUP.
2
Press
then press OK/ENTER.
3
Press
OK/ENTER.
4
Press
press OK/ENTER.
36
The setting menu appears.
/ to select "Operational settings",
e.g.
Operational settings
DR 1
IR code
Instant skip interval 30 sec.
10 sec.
Instant replay interval
Title thumbnail point 35 sec.
HDD/RAM title play Title resume
3 sec.
Still group interval
Priority contents
Photo
/ to select "IR code", then press
e.g.
Operational settings
DR 1
IR code
30 sec.
Instant skip interval
10 sec.
Instant replay interval
35 sec.
Title thumbnail point
Title resume
HDD/RAM title play
Still group interval 3 sec.
Priority contents Photo
/ to select "DR 2" (example), then
The submenu disappears.
By pressing the OK/ENTER button, the selected
command mode is set in the recorder. Operation may not
be possible temporarily until you set the corresponding
mode in the remote control itself. Proceed to the next
setting.
3/27/06, 17:43
DR 1
DR 2
DR 3