How To Self-Check And Initialize The Hdd & Dvd Video Recorder - Toshiba RD-87DTKF Service Manual

HOW TO SELF-CHECK AND INITIALIZE THE HDD & DVD VIDEO
1. Turn on the HDD & DVD Video Recorder.
2. To put the HDD & DVD Video Recorder into the HDD mode, press [HDD] on the remote control unit.
3. To put the HDD & DVD Video Recorder into the self-check mode, after pressing [VARIABLE SKIP] button,
press the [0], [7], and [9] buttons on the remote control unit in that order within three seconds.
Fig. a appears on the screen and all LEDs light.
Table 1: Description of Fig. a
INDICATION
DVD CONNECT STATUS (*1)
HDD CONNECT STATUS (*2)
HDD POWER ON HOURS (*3)
4. Upon the self-check completion, Fig. b appears on the screen.
RECORDER
SELF CHECK
*1
DVD CONNECT STATUS :
*2
HDD CONNECT STATUS :
*3
HDD POWER ON HOURS :
POWER OFF :
Fig. a: Self-Check Mode Screen
Connecting Condition of DVD(F/E)
Connecting Condition of HDD
Value of HDD power on hours obtained from S.M.A.R.T. command. (If not obtainable,
value of HDD power on hours is "0".)
Value in parentheses is the factory setting value. (If no setting, the value is "0".)
SELF CHECK
*4
DVD CONNECT STATUS :
*5
HDD CONNECT STATUS :
HDD POWER ON HOURS :
*6
HDD FORMAT :
*7
POWER OFF :
Fig. b: Screen of Finishing Self-Check Mode
--
--
POWER
DESCRIPTION
OK
OK
120
ENTER
POWER
1-7-1 E2J70INT