Operating The Second And Third Toshiba Hdd/Dvd Video Recorders With The Remote Control Of This Recorder - Toshiba RD-XS35SC Owner's Manual

Basic setup
F: Remote control settings (Continued)

Operating the second and third TOSHIBA HDD/DVD video recorders with the remote control of this recorder

Switches the codes to operate the recorder.
If you use the second and third TOSHIBA HDD/DVD video recorders, set the different remote codes for each
recorder to avoid confusion in the response of the recorders.
Example: Setting this recorder's remote control mode to DR 2, after another HDD/DVD recorder has been
set to DR 1.
(It is necessary to set the remote control mode on both the recorder and the remote control.)
Start
50
RD-XS35SU/SC_Inst_E_p48-56
Setting up the recorder
1
Press SETUP.
SETUP
2
Press
then press ENTER.
ENTER
3
Press
ENTER.
ENTER
4
Press
press ENTER.
ENTER
50
The setting menu appears.
/ to select "Operational settings",
e.g.
Operational settings
Off
Operation beep
Completion beep On
DR 1
IR code
Instant skip interval 30 sec.
Instant replay interval 10 sec.
Title thumbnail point 35 sec.
HDD/RAM title play Title resume
Still group interval 3 sec.
Priority contents Photo
/ to select "IR code", then press
e.g.
Operational settings
Operation beep Off
On
Completion beep
IR code DR 1
Instant skip interval 30 sec.
10 sec.
Instant replay interval
Title thumbnail point 35 sec.
HDD/RAM title play Title resume
Still group interval
3 sec.
Priority contents Photo
/ to select "DR 2" (example), then
The submenu disappears.
Press ENTER button and the IR code you selected is
activated. Operation may not be possible temporarily until
you set the corresponding mode of the remote control.
Proceed to the next setting.
06.2.13, 4:34 PM
SETUP
DR 1
DR 2
DR 3
SETUP