Organization; Related Documentation - Cisco PA-POS-1OC3 Installation And Configuration Manual

Cisco systems port adapter installation and configuration guide
Table of Contents

Advertisement

Organization

Organization
This document contains the following chapters:
:
Section
Chapter 1
Chapter 2
Chapter 3
Chapter 4

Related Documentation

Your router or switch and the Cisco IOS software running on it contain extensive features and
functionality, which are documented in the following resources:
PA-POS-1OC3 Single-Port Port Adapter Installation and Configuration Guide
iv
Cisco 7304 PCI port adapter carrier card in the Cisco 7304 router
Cisco 7401ASR router
Cisco 7500 series routers, which consist of the 5-slot Cisco 7505, the 7-slot Cisco 7507, and the
13-slot Cisco 7513 routers.
Cisco 7600 series routers, which consist of the 3-slot Cisco 7603, the 6-slot Cisco 7606, the 9-slot
Cisco 7609, and the 13-slot Cisco 7613 routers, using FlexWAN and Enhanced FlexWAN modules.
Title
PA-POS-1OC3 Overview
Preparing for Installation
Removing and Installing the
PA-POS-1OC3
Configuring the PA-POS-1OC3
Cisco IOS software:
For configuration information and support, refer to the modular configuration and modular
command reference publications in the Cisco IOS software configuration documentation set that
corresponds to the software release installed on your Cisco hardware.
You can access Cisco IOS software configuration and hardware installation and maintenance
Note
documentation on the World Wide Web
is available at the following URL:
Cisco 7200 VXR routers:
For an online directory to quickly access documents for Cisco 7200 VXR routers, refer to the
Cisco 7200 Series Routers Documentation Roadmap at the following URL:
http://www.cisco.com/en/US/products/hw/routers/ps341/products_documentation_roadmap09
186a00801c0915.html
For hardware installation and maintenance information, refer to the Cisco 7200 VXR
Installation and Configuration Guide or the Cisco 7200 VXR Routers Quick Start Guide.
Description
Describes the PA-POS-1OC3 and its LEDs and cables.
Provides supporting information about addressing,
networks, and SONET.
Describes safety considerations, tools required, and
procedures you should perform before the actual
installation.
Provides instructions for removing and installing the
PA-POS-1OC3 port adapter
Provides instructions for configuring the
PA-POS-1OC3 on the supported platforms.
at
http://www.cisco.com. Translated documentation
http://www.cisco.com/public/countries_languages.shtm
Preface
OL-6514-04

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pa-pos-2oc3

Table of Contents