Preface; Organization; Related Documentation - Cisco 7304 Installation And Configuration Manual

Organization

Organization
This document contains the following chapters:
Section
Chapter 1
Chapter 2
Chapter 3
Chapter 4

Related Documentation

Your router and the Cisco IOS software running on it contain extensive features and functionality, which
are documented in the following resources:
•
•
•
•
Cisco 7304 6-Port Clear Channel E3 Line Card Installation and Configuration
viii
Title
Overview
Preparing for Installation
Removing and Installing Line
Cards
Configuring the 6E3 Line Card
Cisco IOS software
For configuration information and support, refer to the modular configuration and modular
command reference publications in the Cisco IOS software configuration documentation set that
corresponds to the software release installed on your Cisco hardware.
You can access Cisco IOS software configuration and hardware installation and maintenance
Note
documentation on the World Wide Web at http://www.cisco.com.
Translated documentation is available at the following URL:
http://www.cisco.com/public/countries_languages.shtml.
Cisco 7304 router:
– For hardware installation and maintenance information, refer to the Cisco 7304 Router
Installation and Configuration Guide
– Cisco 7304 Router Quick Start Guide
For international agency compliance, safety, and statutory information for WAN interfaces:
Site Preparation and Safety Guide
–
Regulatory Compliance and Safety Information for the Cisco 7304 Internet Router
–
The Cisco Information Packet that shipped with your router.
Description
Describes the 6E3 line card and its LED displays,
cables, and receptacles.
Describes safety considerations, tools required,
and procedures you should perform before the
actual installation.
Describes the procedures for installing and
removing the 6E3 line card in the supported
platform.
Provides instructions for configuring the 6E3 line
card on the supported platform.

Preface

OL-5061-01