Battery Status (When Handle Is Not On Charger); Toothbrush Handle; Brush Head - Philips Sonicare ProtectiveClean HX6803 Manual

Battery status (when handle is not on charger)

Cleaning

Toothbrush handle

Brush head

When removing the Philips Sonicare from the
charger, the battery light at the bottom of the
toothbrush will indicate the status of the battery
life.
- Solid green LED: full battery
- Flashing green LED: medium battery
- Flashing amber LED and three beeps: low
battery
- Flashing amber LED and two sets of five beeps:
No brushing sessions left (charge toothbrush)
Note: Do not clean the brush head, handle or
travel case in the dishwasher.
1 Remove the brush head and rinse the metal
shaft area with warm water. Make sure you
remove any residual toothpaste.
Caution: Do not push on the rubber seal on the
metal shaft with sharp objects, as this may
cause damage.
2 Wipe the entire surface of the handle with a
damp cloth.
Note: Do not use isopropyl rubbing alcohol,
vinegar or bleach to clean handle as this may
cause discoloration.
1 Rinse the brush head and bristles after each
use.
2 Remove the brush head from the handle and
rinse the brush head connection with warm
water at least once a week.
19
English