Battery Status And Charging; Battery Status (When Handle Is Not On Charger) - Philips Sonicare ProtectiveClean 4700 Manual

Battery status and charging

Battery status (when handle is not on charger)

- Triple tone of high-med-low means the
pressure sensor feature has been
deactivated. The brush head replacement
light and battery light will also blink amber 1
time in unison to confirm deactivation.
If you continue holding the power on/off button
after the three short beeps, the
activate/deactivate sequence repeats.
1 Put the plug of the charger in an electrical
outlet.
2 Place the handle on the charger.
- The charger will emit 2 short beeps to
confirm that the handle is placed properly.
- The flashing light of the battery level
indicator shows that the toothbrush is
charging.
- When handle is fully charged on the charger,
the battery light shows solid green for 30
seconds and switches off.
Note: Your toothbrush comes pre-charged for first
use. After first use, charge for at least 24 hours.
When removing the Philips Sonicare from the
charger, the battery light at the bottom of the
toothbrush will indicate the status of the battery
life.
- Solid green LED: full battery
- Flashing green LED: medium battery
- Flashing amber LED and three beeps: low
battery
19
English