Intensity Levels; Battery Status (When Handle Is Not On Charger) - Philips Sonicare HealthyWhite+ HX8962/05 Manual

2 Press the power on/off and mode button again within 2.5 seconds
to switch to White mode.
3 Press the power on/off and mode button after 2.5 seconds to
pause your Philips Sonicare.

Intensity levels

-
Low: 1 LED indicator light
-
Medium: 2 LED indicator lights
-
High: 3 LED indicator lights
Note: To adjust the intensity level to the next higher or lower level,
press the + intensity level button to increase intensity or the -
intensity level button to decrease intensity at any time during the
brushing cycle

Battery status (when handle is not on charger)

-
A flashing yellow battery level indicator indicates a low charge.
-
A flashing green battery level indicator indicates a moderate
charge.
-
A solid green battery level indicator indicates a full charge (Fig. 6).
Note: If you hear 5 beeps and the battery level indicator flashes
yellow, this means that you have to recharge the battery. When the
battery is completely empty, the Philips Sonicare turns off. Place the
Philips Sonicare on the charger to charge it.
To keep the battery fully charged at all times, you may keep your
Sonicare on the charger when not in use.
35_020_9633_2_DFU-Simple_A6_v1.indd 11
11
English
08/12/15 08:47