Haier GDG900AW User Manual And Installation Instructions page 19

Cycle Signal
Wrinkle Care
Cycles
Indicates current program remaining time. Initial display time is 60 minutes.
LED display
This is subject to change depending on the moisture level in the dry load.
Temp
Sensor Dry Level
Timed/Cycles
2. Press "Auto-Dry Cycles" button to select a suitable full automatic cycle.
• The Normal program will be automatically selected after powering on. If
another full automatic program is desired, press "Auto-Dry Cycles" button until
corresponding indicator turns on.
• To select your desired settings, the "Custom" function should be chosen.
• The dryer can memorize programs defined by user and display the previous
program upon next application of this function.
Use details are as follows (Features may vary per model purchased):
After powering on, press "Auto-Dry Cycles" until "Custom" status, then set
"Timed-Dry Cycles" to Timed Dry or Rack Dry and set status of other buttons.
Press "Start/Pause" button or after half a minute, the program defined by user will be
stored and will be directly displayed upon next use.
Note: The"Sensor Dry Level" button will be inactive during use of "Custom" function
and "Touch Up" cycle.
3. Press "Sensor Dry Level" button to select a suitable drying level.
• After powering on, the clothes dryer automatically sets dryness at "very", which
means a longer drying time. If other drying level is desired, press "Sensor Dry
Level" button to select.
4. Press "Temp" button to set a suitable drying temperature.
• After switching on, the dryer sets the corresponding temperature adapting to
different cycles selected. If other drying temperature is wanted, press "Temp"
button to enable such a selection. There are 4 available drying temperatures:
High, Medium, Low, and Air Dry.
Auto-Dry Cycles
Normal
Heavy
Cotton
Bulky Items
Softer
Off
Normal
High
Very
Auto-program
Casual
Delicate
Touch Up
Custom
English
18