Stop The Engine; Transport Unit; Maintenance; Service Position - Ariens Sno-Thro Compact Classic 24 Track Operator's Manual

Figure 15
IMPORTANT: Model 920029: When the unit
is turned left or right, the Auto-Turn
differential automatically unlocks wheels for
easier turning. On a straight path, the
differential locks both wheels in place for best
traction.
Clear a Clogged Discharge Chute
WARNING: NEVER use your
hand to clean out discharge
chute.
1. Stop engine, remove key and wait for all
moving parts to stop and for hot parts to
cool.
2. Use the snow clean-out tool to clear the
clog.
3. Return the tool to its storage position on
the auger housing.

STOP THE ENGINE

1. Release traction drive clutch lever.
2. Run auger / impeller for a few minutes to
remove loose or melting snow to prevent
impeller from freezing.
3. Release attachment clutch lever.
Wheel Locked for
Traction
Wheel Spins
Freely
TM
EN - 13
4. Models 920028, 920029, 920030: Turn
engine key to stop position and remove
key.
Model 920025: Remove engine key.
5. Turn fuel valve to off position.

TRANSPORT UNIT

1. Stop engine, remove key and close fuel
valve.
2. Secure unit chassis to transport vehicle.
NOTICE: NEVER secure from rods or
linkages that could be damaged.

MAINTENANCE

WARNING: Read and
understand the Safety section
before proceeding.
Your Ariens dealer can provide service and
adjustments to keep your unit operating at
peak efficiency. Contact an authorized engine
manufacturer's service center for engine
service.

SERVICE POSITION

See Figure 16.
WARNING: AVOID INJURY.
Before tipping unit, close fuel
valve and drain fuel from tank
and fuel system. (Refer to
engine manual for instructions.)
Make sure unit is secure and will
not tip.
Figure 16