Table of Contents
Advertisement
¡ The earthing system is correctly installed.
¡ If using a residual current device, only use one that
bears the mark
. The presence of this mark is the
only way to be sure that it fulfils all the applicable
regulations.
¡ The mains cable does not come into contact with
heat sources.
5.2 Setting up the appliance
Place the appliance on a smooth surface.
Never set up the appliance behind a decorative door or
the door of a kitchen unit. There is a risk of overheat-
ing.
Adjacent units
Any adjacent units must not be made of flammable ma-
terials. The fronts of any adjacent units must be heat-
resistant up to at least 90 °C.
Wall fixing
To prevent the appliance from tipping over, you must
fix it to the wall using the enclosed brackets. To secure
the appliance to the wall, follow the installation instruc-
tions.
5.3 Removing the appliance
Unplug the appliance from the mains.
WARNING ‒ Risk of electric shock!
When you disconnect the appliance from the mains,
the connections may cause residual voltages.
▶
Only allow a professional to connect the appliance.
5.4 Door lock
To prevent children reaching into the oven when it is
hot, the oven door is equipped with a lock. The door
lock is located at the top of the oven door.
Note: If the door safety lock is no longer needed or if it
is soiled.
Opening the appliance door
▶
Press the lock upwards.
Removing the door lock
1.
Open the oven door.
→ "Opening the appliance door", Page 9
2.
Unscrew the screw and remove the door lock.
3.
Close the appliance door.
Installation and connection en
9
Advertisement
Table of Contents
