Table of Contents
Advertisement
en Troubleshooting
26.1 Malfunctions
Fault
The appliance is not
working.
Appliance is not heat-
ing and the colon
flashes in the display.
The appliance door
cannot be opened
and
lights up in
the display.
The appliance door
cannot be opened
and
lights up in the
display.
The time flashes in
the display.
The time does not ap-
pear in the display
when the appliance is
switched off.
lights up in the dis-
play and no settings
can be made on the
appliance.
flashes in the dis-
play and the appli-
ance does not start.
appears in the
display.
A message with
appears in the dis-
play, e.g. - .
26.2 Information on the display panel
Fault
No displays light up.
32
Cause and troubleshooting
The mains plug of the power cord is not plugged in.
▶
Connect the appliance to the power supply.
The circuit breaker is faulty.
▶
Check the circuit breaker in the fuse box.
There has been a power cut.
▶
Check whether the lighting in your kitchen or other appliances are working.
Demo mode is activated.
1.
Briefly disconnect the appliance from the power supply by switching the circuit breaker in
the fuse box off and back on again.
2.
Deactivate demo mode within five minutes by changing the basic setting to .
→ "Basic settings", Page 17
The childproof lock locks the appliance door.
▶
Use
to deactivate childproof lock.
→ "Childproof lock", Page 22
The cleaning function locks the appliance door.
▶
Allow the appliance to cool down until goes out in the display.
→ "Self-cleaning", Page 26
There has been a power cut.
▶
Reset the time.
→ "Setting the time", Page 20
The basic setting has been changed.
▶
Change the basic setting for the time display.
→ "Basic settings", Page 17
Childproof lock is activated.
▶
Use the
button to deactivate the childproof lock.
The cooking compartment is too hot for the selected operation.
1.
Switch off the machine and allow it to cool.
2.
Restart the operation.
The maximum cooking time has been reached. To prevent an unwanted permanent opera-
tion, the appliance automatically stops heating after several hours if the settings are un-
changed.
▶
Switch off the appliance.
Implement new settings, if required.
Tip: To prevent the appliance from switching off when you do not want it to, e.g. for an
extremely long preparation time, set a cooking time.
→ "Time-setting options", Page 19
Electronics fault
1.
Press
.
If necessary, reset the time on the clock.
‒
a If the fault was a one-off, the error message disappears.
2.
If the error message appears again, call the after-sales service. State the exact error
message and the E no. for your appliance in full.
→ "Customer Service", Page 35
Cause and troubleshooting
The power supply has been disconnected.
▶
Use other electrical appliances to check whether there has been a power failure.
Advertisement
Table of Contents
