Table of Contents
Advertisement
en Cookware test
Display
Setting
Automatic management with power limitation
Restoring factory settings
1
Factory setting
13.2 To go to the basic settings
Requirement: The hob must be switched off.
1.
To switch on the hob, touch
2.
Within the next 10 seconds, press and hold
four seconds.
Product information
Directory for the technical after-sales
service (TK)
Production number
Production number 1
Production number 2
a The first four displays provide the product informa-
tion. Touch
or to view the individual displays.
14 Cookware test
The quality of the cookware has a major influence on
the speed and the result of the cooking process.
You can use this function to test the quality of the cook-
ware.
Before the test, ensure that the diameter of the cook-
ware base corresponds to the diameter of the cooking
zone being used.
Access is via the basic settings. → Page 17
14.1 Procedure for checking the cookware
1.
Set the cookware at room temperature with approx.
200 ml water in the centre of the cooking zone
whose diameter best fits the diameter of the base of
the cookware.
2.
Call up the basic settings and select .
3.
Touch or . The
zones.
a The function has been activated.
a After 20 seconds, the result appears in the cooking
zone displays.
15 Basic operation
15.1 Switching on the appliance
▶
Turn the function selector to any position other than
the "Off" position .
a The appliance is switched on.
15.2 Switching off the appliance
▶
Turn the function selector to the "Off" position .
a The appliance is switched off.
18
.
Display
.
.
display flashes in the cooking
Value
- Deactivated: Does not show the power limit unless
1
is activated.
- Switched on: Always displays the power limit.
- Individual settings
- Factory settings.
3.
Touch
and light up alternately as well as as a preset
a
value.
4.
Touch
for
pears.
5.
Use
or
6.
Touch and hold
a The settings are saved.
13.3 Exiting the basic settings
▶
To exit the basic settings and and switch off the
hob, touch
14.2 Checking the result
In the following table, you can check the result for the
quality and speed of the cooking process:
Result
1
If a smaller cooking zone is available, test the cook-
ware on this cooking zone.
Touch or to activate the function.
15.3 Types of heating and temperature
1.
Use the function selector to set the type of heating.
2.
Use the temperature selector to set the temperature
or grill setting.
a The appliance starts heating after a few seconds.
3.
When the dish is ready, switch off the appliance.
Tips
¡ The most suitable type of heating for your food can
be found in the description of the types of heating.
1
.
to access the basic settings.
repeatedly until the desired setting ap-
to select the required value.
for four seconds.
.
The cookware is not suitable for the
cooking zone and therefore does not
1
heat up.
The cookware is taking longer to heat
up than expected and cooking is not
progressing as well as it ought to.
The cookware is heating up correctly
and cooking is progressing well.
1
Advertisement
Table of Contents
